Zhuzhou Lizhou Cemented Carbide Co., Ltd.
INTEGRITY INNOVATION, COMMON DEVELOPMENT
Add to Cart
Lz10 Lz20 Carbide Wire Drawing Dies , Raw Material Tungsten
Carbide Pellets Unground
Description and Application:
1. LZ Carbide wires drawing dies are well know in market, and more than 100 tons market in that area,,which are made from tungsten carbides of superior quality which are resistant to high heat and shock. At the same time, LZ cemented carbide drawing pellet are very cost effective compared with similar products.
2. LZ as the one of the biggest professional manufactures of Tungsten carbide wiresdrawing dies in China Which supplies all various types which are suitable for different wires drawing. We have strict quality control and assurance system to guarantee the consistent quality. We only produce the products which you satisfied.
3.Tungsten carbide drawing dies is a class of materials widely used in drawing wires and rods because of their superior strength, toughness and wear resistance. All major wire producers can use drawing dies, which include wire drawing dies, tube drawing dies, bar drawing dies.
Type: S11, S13, LV,LE, W, and various sizes are as per China new technical standard. We can make suggestions of suitable grades for customers' usage.
Production Process:
Below are the production processes of tungsten carbide wires drawing dies, to ensure high quality, we assureed our customers that:
1. All materials are tested in terms of density, hardness and T.R.S before use.
2. Every piece of product goes through in-process and final inspection.
3. Every batch of product can be traced.
Recommended grade: LZ10/LZ20/LZ25/LZ30/LZ50
| Grade | Grain size(μm) | Density(g/cm³) | Hardness(HRA) | TRS(MPA) |
| LZ10 | 1.2 | 14.90 | >=90.0 | >=2400 |
| LZ20 | 1.6 | 14.70 | >=89.0 | >=2800 |
| LZ30 | 1.6 | 14.40 | >=88.2 | >=2850 |
| LZ40 | 1.6 | 14.03 | >=87.0 | >=3100 |
| LZ50 | 1.6 | 13.85 | >=86.2 | >=3000 |
Inner Size Dimension and Tolerance :
| Inner Size Dimension and Tolerance ( mm) | |||
| ID SIZE(mm) | Tolerance | ID SIZE(mm) | Tolerance |
| >=0.3~0.4 | -0 /+0.08 | >16.0~24.0 | +0/-0.5 |
| >=0.4~0.6 | -0 /+0.08 | >24.0~32.0 | +0/-0.6 |
| >0.6~3.0 | -0 /-0.18 | >32.0~40.0 | +0/-0.8 |
| >3.0~6.0 | -0 /-0.25 | >40.0~55.0 | +0/-1.2 |
| >6.0~9.0 | 0/-0.30 | >55.0~90.0 | +0/-1.5 |
| >9.0~16.0 | +0/-0.4 | >90.0 | 0/-2.0 |
Diameter Size Dimension and Tolerance :
| Diameter Size Dimension and Tolerance ( mm) | |||
| OD SIZE(mm) | Tolerance | ID SIZE(mm) | Tolerance |
| <=10 | -0.15 /+0.15 | >35~40 | -0.4/+0.4 |
| >10~16 | -0.2 /+0.2 | >40~45 | -0.5/+0.5 |
| >16~30 | -0.3 /+0.3 | >45~50 | -0.6/+0.6 |
| >30~35 | -0.4/+0.4 | >50 | -1.3%D/+1.3%D |
Height Size Dimension and Tolerance :
| Height Size Dimension and Tolerance ( mm) | |||
| SIZE(mm) | Tolerance | ID SIZE(mm) | Tolerance |
| <=10 | -0.2 /+0.2 | >35~40 | -0.5/+0.5 |
| >10~16 | -0.3 /+0.3 | >40~45 | -0.6/+0.6 |
| >16~30 | -0.4/+0.4 | >45~50 | -0.8/+0.8 |
About US:
With 25 years production experience,
1. We, LIZHOU CARBIDE, promise you the 100% raw material.
2. We, LIZHOU CARBIDE, quotation your order with 24 hours
3. We, LIZHOU CARBIDE , accept your order as per your requirements
Our guarantee:
1. 100% raw material.
2. Sintered in HIP Furnace
3. Size standard as per your requirements
4. Professional suggestion on products
5. Feedback within 24 hours
6. ISO9001: 2008 certificate.
7. Fully adopted in advance technology and equipment.
8. Professional manufacture for tungsten carbide items with 20 years experience.
9. Fully adopted in advance technology and equipment.
10. Quality Control System and strict inspection.