Zhuzhou Lizhou Cemented Carbide Co., Ltd.
INTEGRITY INNOVATION, COMMON DEVELOPMENT
Add to Cart
Yg15 Tungsten Carbide Rolls for Cold Reinforced Steel
Wire Plant
ZHUZHOU LIZHOU CEMENTED CARBIDE CO.,LTD established in 1993 is a professional Tungsten
carbide manufacturer.Which integrates research & development, production, marketing and services. So
far, we have 25 years’ experience in researching and manufacturing of tungsten carbide products and been
specializing in tungsten carbide rod, carbide rolls, carbide drawing dies, carbide strips and carbide plate
With high purity cemented carbide powder, we can produce various sizes products as per customers
requires.OEM/ODM is welcomed. With high tech equipment and strict quality test system, our products win
a fame of high quality in both domestic and overseas market.
Up to now, our products have been exported to many companies in Southeast Asia, Europe, Americas and
India etc. Being reliable and professional is our value of service. Providing customers with high satisfaction
services and high quality products is always our mission.
Product Description& application:
Tungsten Carbide roll rings as the characters of high wear resistance, high corrosion resistance and good
compressive properties which is an important parts in the steel bar and wire rod rolling. The rolls are
primarily applied in high speed wire line, Kocks three roll mill, seamless pipe stretch reducing mill, three
dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel etc
ZHUZHOU LIZHOU carbide roll rings, which ribbed accuracy and mark clear, at same time to improve the
performance of steel, enhance the strength. It makes sure that the quantity of a rolling reach to 800-1500
tons. Carbide roller can be repaired repeatedly, and greatly reduces the production cost, significantly
improves the efficiency.
Production Process:
Below are the production processes of tungsten carbide roller, to ensure high quality, we assureed our
customers that:
1. All materials are tested in terms of density, hardness and T.R.S before use.
2. Every piece of product goes through in-process and final inspection.
3. Every batch of product can be traced.
Recommended Grade: LZ30/LZ40
Grade Recommended: LZ30/LZ40
LZ30 Used for rolling cold rolled ribbed steel bar.
LZ 40 Used for rolling cold rolled ribbed steel bar with strong strength.
| Grade
| Grain size(μm) | Density(g/cm³) | Hardness(>=HRA) | TRS(>=MPA) |
| LZ30
| 1.6 | 14.03 | 87.0 | 3100 |
| LZ40
| 1.6 | 13.85 | 86.2 | 300 |
Blank size with the tolerance(mm):
| Dimension and Tolerance mm
| |||||
| D |
Tolerance | d | Tolerance | H | Tolerance |
|
<=125 | +0.5/+1.8 | <=90 | -1.5/-0.5 | <=20 | +0.5/+1.5 |
|
>125~180 | +0.5/+2.5 | >90~95 | -1.5/-0.5 | >20 | +0.5/+2.0 |
|
>180~250 | +0.5/+2.8 | >95 | -2.0/-0.5 | --- | |
|
>250 | +0.8/+3.5 | ---- | --- | --- | |
Finished size with the tolerance(mm):
| Dimension and Tolerance mm
| |||||
| OD |
Tolerance | ID | Tolerance | H | Tolerance |
|
<=125 | +0.015/+0.015
| <=90 | 0.0/+0.02
| <=20 | -0.01/+0.01
|
|
>125~180 | >90~95 | >20 | |||
|
>180~250 | >95 | --- | |||
|
>250 | ---- | --- | |||
Finished size (mm):
|
Radial run-out of groove
|
Radial run-out of periphery
| End face runout | Surface parallelism | Inner hole cylindricity |
|
0.013 | 0.013 | 0.01 | 0.01 | 0.01 |
Avaliable Dimension:
| Type | Dimension | ||
| D(mm) | d(mm) | H(mm) | |
|
CR-270×190×30 | 270 | 90 | 30 |
|
CR-250×210×30 | 250 | 210 | 30 |
|
CR-200×90×20 | 200 | 90 | 20 |
|
CR-180×95×18 | 180 | 95 | 18 |
|
CR-180×125×25 | 180 | 125 | 25 |
|
CR-167×55×25 | 167 | 55 | 25 |
|
CR-160×90×15 | 160 | 90 | 15 |
|
CR-150×90×15 | 150 | 90 | 15 |
|
CR-150×90×20 | 150 | 90 | 20 |
|
CR-140×90×15 | 140 | 90 | 15 |
|
CR-140×90×15 | 140 | 90 | 15 |
|
CR-125×82×15 | 125 | 82 | 15 |
|
CR-125×82×20 | 125 | 82 | 20 |
Advantages:
1. LIZHOU is a professional tungsten carbide roll ring manufacturer in China with over 24 years’ experience
and many senior engineers who specialize in tungsten carbide fields for many years.
2. For your non-standard tungsten carbide roller or cemented carbide roller, we have the very ability to
make molds by ourselves, and produce them as per your requirements.
3. Our company has acquired the certificate of quality management system. We have strict quality control
and assurance system to guarantee the consistent quality.
4. Our tungsten carbide roll rings last much longer than the conventional and hardened steel rolls. Clients
can maximize their production before having to change new rolls.
5. Samples and quotations of tungsten carbide rollers will be offered upon receipt of your further
requirements. We promise fast delivery.