Zhuzhou Lizhou Cemented Carbide Co., Ltd.
INTEGRITY INNOVATION, COMMON DEVELOPMENT
Add to Cart
YL10.2 supplier provide tungsten solid carbide rod with
the small and short length size
We manufacture ground and unground carbide rods in stock with HIP sintered and 100% virgin
material.Our recommend grade for machining carbon steel to aluminum , non-ferrous metals and titanium
which cutting tool material HRC<=55. which 10% cobalt, grain size 0.8um, TRS>=3800. The stability and
high performance of the series bring many benefits to our customers and inspires them to develop quality
products.
solid tungsten carbide rods:
1. Grade: 10% cobalt and 12% cobalt recommend
2. Size: Diameter 4--30mm available
3. Certification: ISO9001,
4. Mirror polished to h6 available
5. Metric and Inch dimensions available
6. Standard length: 330mm/310mm and can cut into different length as per requirments
1. Tungsten carbide rods are mainly used for making various kinds of solid carbides like PCB micro drill,
drill bits, end mill, reamer etc.
2. Tungsten carbide rods can be used for processing aluminum alloy, stainless steel, heat resistant alloy
steel, ductile iron, nickel and titanium alloy, nonferrous metal etc.
3. Tungsten carbide rods can also be used for a variety of plug-ins, silicon steel, cold rolled sheet, stainless
steel punch, thimble and punch.
4. Tungsten carbide rods are mainly used for making various kinds of solid carbides like PCB micro drill,
drill bits, end mill, reamer etc.
5. Tungsten carbide rods can be used for processing aluminum alloy, stainless steel, heat resistant alloy
steel, ductile iron, nickel and titanium alloy, nonferrous metal etc.
6. Tungsten carbide rods can also be used for a variety of plug-ins, silicon steel, cold rolled sheet, stainless
steel punch, thimble and punch.
Advantages of product:
1. Adopting spray drying tower granulation, raw material with low oxygen content, contamination,
2. the flowability, apparent density particle and granulate is uniform
3. Adopting high-precision extrusion molding machine, uniform product density, precise
dimension, high roundness, and straightness;
4. Adopting advanced HIP sintering, effectively eliminate the internal holes and defects, the product has
good compactness, high strength, good polishing performance;
5.Adopting a special stress-relief process to eliminate the internal stress of products to further enhance the
product strength and improve the microstructure;Precision grinding machine processing, ground rod can
reach h6 tolerance.
Recommended Grade:
| Grade
| Grain size(μm) | Density(g/cm³) | Hardness(>=HRA) | TRS |
| LX25
| 0.8 | 14.5 | >=91.5 | >=3800 |
| LBC20
| 0.8 | 14.42 | >=91.5 | >=4000 |
| LBC25
| 0.6 | 14.03 | >=92.0 | >=4000 |
Dimension and Tolerance
| Dimension
| Tolerance of diameter(mm) | Tolerance of length(mm) |
| BL-Φ4.0×330
| +0.3/+0.5 | +0/+5.0 |
| BL-Φ6.0×330
| ||
| BL-Φ8.0×330
| ||
| BL-Φ10.0×330
| ||
| BL-Φ10.0×330
|
+0.30/+0.70
| +0/+5.0
|
| BL-Φ12.0×330
| ||
| BL-Φ14.0×330
| ||
| BL-Φ16.0×330
| ||
| BL-Φ18.0×330
|
+0.40/+1.0
| +0/+5.0
|
| BL-Φ20.0×330
| ||
| BL-Φ22.0×330
| ||
| BL-Φ24.0×330
| ||
| BL-Φ26.0×330
| ||
| BL-Φ28.0×330
| ||
| BL-Φ30.0×330
|