Zhuzhou Lizhou Cemented Carbide Co., Ltd.
INTEGRITY INNOVATION, COMMON DEVELOPMENT
Add to Cart
Ground Blank Tungsten Carbide Roller High Strength High
Corrosion Resistance
Product Description& application:
Tungsten Carbide roller as the characters of high wear resistance, high corrosion resistance and good compressive properties which is an important parts in the steel bar and wire rod rolling. The rolls are primarily applied in high speed wire line, Kocks three roll mill, seamless pipe stretch reducing mill, three dimensional rolls for cold-rolled ribbed steel bar, and composite roll for hot-rolled bar screw thread steel etc
ZHUZHOU LIZHOU carbide roller , which ground accuracy and mark clear, at same time to improve the performance of steel, enhance the strength. It makes sure that the quantity of a rolling reach to 800-1500 tons. Carbide roller can be repaired repeatedly, and greatly reduces the production cost, significantly improves the efficiency.
Production Process:
Below are the production processes of tungsten carbide roller, to ensure high quality, we assureed our customers that:
1. All materials are tested in terms of density, hardness and T.R.S before use.
2. Every piece of product goes through in-process and final inspection.
3. Every batch of product can be traced.
Recommended Grade: LZ30/LZ40
Grade Recommended: LZ30/LZ40
LZ30 Used for rolling cold rolled ribbed steel bar.
LZ 40 Used for rolling cold rolled ribbed steel bar with strong strength.
| Grade | Grain size(μm) | Density(g/cm³) | Hardness(>=HRA) | TRS(>=MPA) |
| LZ30 | 1.6 | 14.03 | 87.0 | 3100 |
| LZ40 | 1.6 | 13.85 | 86.2 | 300 |
Blank size with the tolerance(mm):
| Dimension and Tolerance mm | |||||
| D |
Tolerance | d | Tolerance | H | Tolerance |
| <=125 | +0.5/+1.8 | <=90 | -1.5/-0.5 | <=20 | +0.5/+1.5 |
| >125~180 | +0.5/+2.5 | >90~95 | -1.5/-0.5 | >20 | +0.5/+2.0 |
| >180~250 | +0.5/+2.8 | >95 | -2.0/-0.5 | --- | |
| >250 | +0.8/+3.5 | ---- | --- | --- | |
Finished size with the tolerance(mm):
| Dimension and Tolerance mm | |||||
| OD |
Tolerance | ID | Tolerance | H | Tolerance |
| <=125 | +0.015/+0.015
| <=90 | 0.0/+0.02
| <=20 | -0.01/+0.01
|
| >125~180 | >90~95 | >20 | |||
| >180~250 | >95 | --- | |||
| >250 | ---- | --- | |||
Finished size (mm):
| Radial run-out of groove |
Radial run-out of periphery | End face runout | Surface parallelism | Inner hole cylindricity |
| 0.013 | 0.013 | 0.01 | 0.01 | 0.01 |
Avaliable Dimension:
| Type | Dimension | ||
| D(mm) | d(mm) | H(mm) | |
| CR-270×190×30 | 270 | 90 | 30 |
| CR-250×210×30 | 250 | 210 | 30 |
| CR-200×90×20 | 200 | 90 | 20 |
| CR-180×95×18 | 180 | 95 | 18 |
| CR-180×125×25 | 180 | 125 | 25 |
| CR-167×55×25 | 167 | 55 | 25 |
| CR-160×90×15 | 160 | 90 | 15 |
| CR-150×90×15 | 150 | 90 | 15 |
| CR-150×90×20 | 150 | 90 | 20 |
| CR-140×90×15 | 140 | 90 | 15 |
| CR-140×90×15 | 140 | 90 | 15 |
| CR-125×82×15 | 125 | 82 | 15 |
| CR-125×82×20 | 125 | 82 | 20 |
Advantages:
1. LIZHOU is a professional tungsten carbide roller manufacturer in China with over 24 years’ experience and many senior engineers who specialize in tungsten carbide fields for many years.
2. For your non-standard tungsten carbide roller or cemented carbide roller, we have the very ability to make molds by ourselves, and produce them as per your requirements.
3. Our company has acquired the certificate of quality management system. We have strict quality control and assurance system to guarantee the consistent quality.
4. Our tungsten carbide roller last much longer than the conventional and hardened steel rolls. Clients can maximize their production before having to change new rolls.
5. Samples and quotations of tungsten carbide rollers will be offered upon receipt of your further requirements. We promise fast delivery.